You are now the location is:Home >> Customer Service >> Frequently Asked Questions

How many types of batteries?
Chemical batteries according to the nature of work can be divided into: primary batteries (primary batteries); secondary batteries (rechargeable batteries) lead-acid batteries. Where: a battery can be divided into: paste-type zinc-manganese batteries, cardboard manganese batteries, alkaline manganese batteries, zinc-silver button batteries, lithium manganese button batteries, button manganese batteries, zinc-air battery, a lithium manganese....
Which battery consists of several parts?
Any cell consists of four basic components, the four main components of the two electrodes of different materials, electrolyte, separator and the housing.
Why is there battery anode surface condensation phenomenon?
Unused drops battery anode surface of the phenomenon is due to the production process of the battery needs to be used for surface treatment of alcohol, and alcohol together with the volatile and relatively slow different storage conditions the battery will cause the battery to the negative electrode surface appears if condensation phenomenon.
Why is there battery anode surface fogging phenomenon?
The main reason is because the battery storage conditions, temperature and humidity differences, climate and other external environment caused.
Why is there burst battery cover?
There are two reasons: one, the original out of the battery is not in use before the explosion occurred cover, is likely to battery positive and negative intermediate isolation membrane damage cause internal short circuit occurs burst inflatable cover. 2, the battery in the assembly process can lead to improper operation by employees arising from battery short burst cover. Therefore, the battery must be used correctly.
Product after the battery is not energized how to do?
If this occurs, first check the quality of the product, the structure is normal. And then measure the battery voltage, current is normal, you can also battery positive and negative Wipe with a clean, soft cloth and then installed to use.
CR coin cell battery commonly used model is, how to identify?
CR represents a lithium - manganese dioxide, CR behind the four digits, the first two in diameter, the latter two are high, for example: CR2032 refers to a 20mm diameter, 3.2mm high lithium - manganese dioxide button battery . So CR1220 refers to a 12mm diameter, 2.0mm high lithium - manganese dioxide button battery. Disposable lithium manganese button battery nominal voltage is 3V, termination voltage of 2V, typical operating current....
Battery What precautions when?
1 Carefully read the battery specification, use the recommended batteries; (2) Check electrical and battery contacts are clean and, if necessary, wipe clean with a damp cloth after drying into the correct polarity; 3 no adult custody, do not let children replace batteries, small batteries such as button batteries should be placed so children can not reach. 4 Do not mix new and old batteries or different types of batteries together 5 Do not try to use heating, charging or other ....
Total: 8 Current: 1/1   [First]   [Previous]   [Next]   [Last]